| pallet trucks full details | pallet truck | ||
 Find a pallet truck on our site. We carry the best pallet truck sales and information. Our pallet truck directory will guide you through the steps of buying the right pallet truck.HELIPORT: 65'' diameter.STORAGE: Mud & Cmt Bulk--8,500 cf; LiquidMud--1,490 bbl; Fuel--2,254 bbl; Water forDrilling--6,612 bbl; Potable Water--983 bbl.DRILLING EQUIPMENT: Drawworks--Nat''l 1320UE; Pumps--two Nat''l 12-P-160; Prime movers--fourCat. D-399; Rotary Table--Nat''l C-375; Top Drive--Varco.DERRICK: 147'' x 30''; 1,000,000 lb hook load.BOP SYSTEM: Two double 13 5/8", 10,000 psi wp;one 13 5/8'', 5,000 psi wp annular.CRANES: Three LeToumeau, PCM-120 AS w/100''boom, 50 short tons @ 24''.REMARKS: Formerly Glomar High Island VI. Continuing its fast-paced engine development efforts, Kohler Co. used the recent OPEI Lawn & Garden Expo to introduce several new gasoline engine models across its entire horsepower range. Included was a new horizontal shaft configuration for the Aegis liquid-cooled engine series; the addition of 20 and 23 hp models to the Triad OHC engines; the availability of electronic fuel injection for its Command Pro 26 hp vertical shaft model; 16 and 17 hp versions of its single-cylinder vertical shaft Command engines; and an 8.5 hp Command Pro CS horizontal shaft engine. Fill stations are built in many sizes and configurations: one-, two- or three-bottle fill positions; drop-down or side-opening doors. Regardless of design, fill stations need to be built and tested to NFPA 1901. Fill stations weigh from 300 to 750 pounds and typically are side-loaded because the fuel tank is located at center-rear. Fair Mfg. is now offering prime or standby generators by Stamford or Marathon. These generators are 18-300 kW, PTO or self-contained diesel genset driven, and 12-lead reconnectable for multiple voltage outputs. Fair Mfg. uses exclusive PolyChain GT PTO drives by Gates. Farmers visiting the @griculture Online[TM] (www.agriculture.com) Web site shared these experiences with power generators: Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass. ©2003 www.pallet-truck.net All rights reserved. |
|