| pallettruckmanufacturers | pallet truck | ||
 Find a pallet truck on our site. We carry the best pallet truck sales and information. Our pallet truck directory will guide you through the steps of buying the right pallet truck.Most pressure washers that you''ll find for rent or sale are gas-powered. This type can deliver higher water pressure than the electric kind, some more than 3,000 psi. But gas-powered washers also require more water: 2 to 3 gpm. These washers are the best choice for bigger jobs like preparing siding for painting (Photo 2), removing "aging" stains from wood decks (Photo 5) and deep-cleaning concrete. You can rent one for about $60 a day, plus the cost of accessories like chemical injectors (Photo 1) or longer spray wands for reaching high places. Gas-powered washers (non-commercial units) cost $300 to $800 depending on the pressure they deliver, their features and the engine and pump quality. EMD MD 16 EB-645, one EMD MD 8EB 645;Rotary table: Nat''l. 37 1/2"; Top Drive--Varco TDS 3.BOP SYSTEM: 13 5/8" x 5,000-psi; Shaffer specialannular; 13 5/8" x 10,000-psi; CIW Type U doubleram; 13 5/8" x 10,000-psi; CIW Type U single ram;Hughes KDFJ 27 1/2" diverter.CRANES: Two Nat''l. OS-105 Pedestal w/100'' booms.DERRICK: 160'' Derrick Int''l.; 1,000,000 lb hookcapacity. Support rails to full height for Varco TopDrive drilling system.TOWING REQUIREMENTS: 12,000 hp.REMARKS: Formerly Cliff''s Marlin 17. Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass. Just look at the new Central Commodity System (CCS) for planters and air seeders. CCS bulk tanks carry up to 100 bushels of seed, and have a central location for quick bulk refilling, so you can make the most of short planting windows.Pro-Series[TM] Row-Units, available on all CCS planters, use a maintenance-free Pro-shaft[TM] drive system for smoother operation and greater reliability. Each of our new air seeders uses the unique 90 Series Opener to put the seed right where you want it, acre after acre, in heavy residue, bare beds, and everything in between. ©2003 www.pallet-truck.net All rights reserved. |
|