| zenithpallettrucks | pallet truck |
 Find a pallet truck on our site. We carry the best pallet truck sales and information. Our pallet truck directory will guide you through the steps of buying the right pallet truck.Prime Movers--Three EMD 16-645-E8, 2,200 hp,900 rpm; Rotary Table--Nat''l C-375, 37 1/2"; TopDrive--Nat''l PS2-500/500.DERRICK: Pyramid 160''; 1,100,000 lbBOP SYSTEM: Shaffer 21 1/4", 2,000 psi; 13 5/8", 10,000.CRANES: Three Marathon Le Tourneau PC-120-AS, 45 t.MOORING: Four Danforth, 10,000-lb anchors; fourMarathon LeTourneau W 1500, 22.5-t winches.WORK AREA: Brazil, Potiguar Basin.Chiles OffshoreCHILES COLUMBUSRIG DESIGN: Letourneau Enhanced 116-C.CONSTRUCTION: Amfels Shipyard, Brownsville, Texas, 1999. Jim/Stafford: Early design involvement on the part of the manufacturer is the best way to make sure the resulting component will be reliable and effective.Jeff/Tollok: Carefully review your application requirements. Shaft material, hub material, transmittable torques, and bending moments can influence your selection of the proper locking assembly.Intelligent designWhat can DESIGNERS do when selecting and applying locking devices to improve productivity?Jeff/KTR: Obtaining comprehensive technical information will improve selection and performance. Find a manufacturer that maintains the quality of materials, dimensions, and surface finishes.Jeff/Tollok: Too often not enough questions are asked, and selections are made based on previous designs. Don''t use the same locking assembly simply because it was used elsewhere on the same machine or on a previous machine design. Involve your supplier and use their experience to get recommendations. Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass. ©2003 www.pallet-truck.net All rights reserved. |